Motorola Solutions
The small, flexible and yet extremely powerful MTS1 offers network operators a comprehensive coverage solution that can be rapidly installed and commissioned.
The MTS1 small rugged form factor, IP66 weather resistant enclosure, and ergonomic offers a wide variety of implementation options. Be it for indoor or outdoor wide area coverage applications, the MTS1 provides complete flexibility, covering wall and pole mounted installations. The MTS1 also ensures complete end-to-end security with full support for static, dynamic and group based air interface encryption, authentication and end-to-end encryption. This level of security is maintained even when there is a site link failure causing the base station to operate in local site trunking mode.
Flexible System Capacity
With built-in system capabilities such as Common Secondary Control Channel, Preferred Subscriber Class and Valid Sites, our powerful MTS base stations are able to minimise localised congestion problems. Such advanced features truly set Motorola Solutions MTS base stations apart from conventional solutions.
Features.
Greater Levels of Resilience & Robustness
As the powerful MTS1 supports the full functionality of a TETRA base station, service is not dependent on wide area cells. High availability solutions can be readily enabled by simply connecting two MTS1 base stations to create a highly resilient two-carrier configuration.
Congestion Management
- Controlled mobility between wide area cells and micro cells
- Subscriber Class (Attract Users) and Valid Sites (Prevent Users) mechanisms already available
Additional Capacity
- Low enough RF power for in-building / near-building deployments enables re-use of frequencies
- Micro cells can take the load off of wide area cell:
- Mobility, Security and SDS
- Telephony, Individual Call and Packet Data
Designed for Reliability and Low Maintenance
- Full network and alarm management of device
- Automatic Interference Detection and Correction
- Withstands wide ambient temperature form -40 to +55 CelsiusTraffic re-routed in the event of link
- failure
- Required battery capacity and heat dissipation is low due to excellent power efficiency, and with a strong integrated battery charger, power supply costs are kept to an absolute minimum
Lower Total Cost of Ownership
- Support for IP-over-Ethernet transmission technologies
- Includes native support for MPLS as well as traditional E1 connectivity
- Existing IP backbone can be leveraged to significantly reduce operational costs
- Direct AC power input eliminated the need for expensive rectifiers and simplifies installation and deployment
- Top of tower mounting capability requires shorter cables and reduces power costs
Specifications.
Frequency range
350 – 400 MHz, 410- 430 MHz, 450-470 MHz
Operating bandwidth
5 MHz
Base Radios
1 (4 time slots)
Carrier Spacing
25 kHz (25 / 50 kHz for TEDS)
Transmit Power at top of base station cabinet
10 Watt (4 Watt TEDS)
Input Power
Input Power 115/230 V AC, 50/60Hz and 48 V DC
Equipped with integrated battery chargers
Power Consumption
100 Watt (at 10 Watt Tx)
75 Watt (at 1 Watt Tx)
Transmission
Ethernet or fractional E1 connection Multi Protocol Label Switching (MPLS)
Two Ethernet ports or Two E1 ports with inbuilt multiplexer for either loop protection or redundancy
Support for satellite transmission
Dimensions W x H x D
263mm x 597mm x 206mm
Weight
20.5 Kg (excluding mounting bracket)
IP Rating
IP66 weather resistant enclosure
Download Specifications PDF
Download the MTS1 Small TETRA Base Station manufacturer’s specification PDF.
Let’s start a conversation
If you would like further information, or to discuss your requirements onsite:
Book An Appointment | Arrange A Quotation | Call 033 3939 0022
