For those working in environments containing explosive gases, combustible dust or mining vapours, they are safety critical. With their market leading, robust design and intrinsic safety, the Hytera PD795Ex ATEX two way radio from Hytera guarantee reliable communication in the most hazardous of environments.
The PD700 series intrinsically safe two way radios were developed in compliance with the ETSI DMR standard.
Besides meeting the requirements of the European ATEX and IEC Directives, as well as the North-American FM standard, these ATEX FM radios are compliant with the MIL-STD-810C/D/E/F/G standard and are dust and water-resistant to protection class IP67. Both radios are therefore rugged and long lasting to keep up with you in tough conditions.
The use of batteries or accessory components with a lower level of protection automatically triggers an alarm so that errors of this type cannot occur. A full intrinsically safe accessory portfolio is available to improve your user experience.
The ATEX PD795Ex radio and its batteries are encapsulated, so that all internal switches are protected from, and sealed against hazardous explosive gases and dust particles.
The Hytera PD7 Series ATEX hand portable two way radios are ideal for both private and public sector organisations such as:
Basic Package includes:
1 x PD795Ex ATEX Hand portable walkie talkie radio, Standard antenna, Li-Ion battery, Belt clip, Single charger (multi charger POD available) and 24 Month radio body warranty warranty.
Send a priority transmission to interrupt other calls, ideal for important, critical messages.
Using pseudo-trunking, a Hytera patented technology, slots can be shared to improve capacity usage with transmissions either direct to handset or to repeater.
Combining noise cancelling technology to remove nusiance noise from the transmission, with powerful speakers to deliver clear communications.
This feature allows the radio to switch between sites on Multi-site Conventional and XPT systems, ensuring seamless communication.
Enabling location based services to improve safety and control.
Raise an alarm with top priority to a base station or to other radios with the pre-programmed emergency mode, identifying the ID of the person issuing the alarm. Also receive emergency notifications.
The lone worker feature uses a timer in the radio to measure inactivity. If the timer expires, a warning is issued, and if there is no response to that, the alarm is triggered.
The man down feature will let you know if the radio has been tilted past a certain angle. This may happen for instance if the radio user has fallen over or is unconscious or injured. The alarm will be triggered after a warning is issued to the user.
Through our Application Partners, Radiocoms Systems support a cost effective portfolio of software applications to further enhance your sites operational goals – lone worker, alarm handling and job ticketing streamline efficiency whist aligning with operational procedures, assisting in industry compliance and ultimately creating a safer work environment.
Discover how this product has transformed the operations for some of our customers.
Supported operating modes
• DMR Tier II in acc. with ETSI TS 102 361-1/2/3
• XPT Digital Trunking
• DMR Tier III in acc. with ETSI TS 102 361-1/2/3/4
• Analogue, MPT 1327
1800 mAh (lithium-ion battery)
Battery life (based on a 05 05 90 duty cycle)
1800mAh, Analogue 14.5 hours / Digital 17 hours
± 1.5 ppm
Dimensions H x W x D (without antenna)
141 X 55 X 39mm
Weight (with standard battery)
1024 (64 zones with 256 channels per zone)
12.5 / 20 / 25 kHz (analogue)
12.5 kHz (digital)
160 x 128 pixels, 65536 colours 1.8 inch, 4 rows
Mil spec: 810 C, 810 D, 810 E, 810 F, 810 G
Gas: II 2G Ex ib IIC T4
Dust: II 2D Ex ib IIIC T120°C IP5x
Mine: I M2 Ex ib I
Download the Hytera PD7 Series ATEX digital radio manufacturer’s specification PDF.